Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

From November 28th to 29th, 2025, the fourth "ANSYS Maxwell Electromagnetic Simulation and Magnetic Component Design Training Course" organized by Guangdong Magnetic Components Industry Association (GMCIA) was successfully held in Huizhou City, Guangdong Province. As the finale of the association's technical training in 2025, this training continues the trend of annual "expansion and upgrading" - since 2025, the association has expanded the annual technical training from two sessions to four sessions per year to meet the industry's needs with more intensive and more accurate courses, attracting more and more students from South China. industry needs, attracting extensive attention and active participation from enterprises in South China.

I. Scale of training and participation

The training received a warm response from enterprises in South China, a total of 41 enterprises, 106 engineers registered to participate in the actual number of 87 to the class, a significant degree of participation. After the training, the Association recovered 53 effective post-course questionnaires, which provided valuable first-line feedback data for objectively evaluating the training effect and optimizing the follow-up course system, laying a foundation for the "precision" of industry training.

Two, three core course modules, to create cutting-edge practical knowledge feast

The two-day training focuses on "ANSYS Maxwell electromagnetic simulation technology" and "magnetic component design" two core blocks, the use of "theoretical analysis + simulated real operation + case analysis Using the three-dimensional teaching mode of "theoretical analysis + simulation + case study", senior experts in the industry were invited to give lectures systematically, and the contents are both cutting-edge and practical: Module 1: Introduction to ANSYS Maxwell Electromagnetism Simulation -- Analysis and Practical Operation of the Whole Process Lecture by Dr. Xie Wenyan, a master director from Fuzhou University, focusing on the whole process of ANSYS Maxwell software operation. Maxwell software operation process, combined with ten typical cases, hand in hand to guide students to master the key skills of "modeling → solution → results analysis. The course also optimizes the rhythm of case study according to the feedback from the students to ensure the learning effect. Module 2: Optimized Design of Magnetic Components for 40kW & 60kW Supercharger Modules -- From Material Characteristics to Loss Control Mr. Nie Yingfa, member of the China Magnetic Materials Industry Expert Committee and senior engineer of Tamura (China), will analyze core selection, loss optimization, thermal management, EMI suppression, etc., using popular applications such as automotive OBC transformers and high-frequency inductors as an entry point. The course content closely matches the actual R&D needs of enterprises and provides practical design experience. Module 3: Integrated Design Methods for Electromagnetic Components of Power Electronic Devices Mr. Liu Yitao, Associate Professor of Shenzhen University and Senior Member of IEEE, brings cutting-edge topics covering core themes such as magnetic integration, harmonic suppression, and multi-physical field coupling, which not only broadens the technical vision of the participants, but also gives a clear outlook on the future development path of integrated design.

Third, the training effect is highly recognized, and the feedback data are eye-catching.

According to the statistics of 53 valid post-course questionnaires, the training satisfaction and usefulness of the performance is outstanding: overall satisfaction exceeds 90%: more than 90% trainees on the training course as a whole said "satisfied" or "very satisfied"; knowledge acquisition sense of nearly 80%: Nearly 80% of the trainees felt that they had "basically gained" or "fully gained" the expected knowledge and skills; the degree of matching of needs reached 85%+: more than 85% trainees gave feedback that the content of the training was "in line with" or "fully in line with" their needs. Matching degree of demand 85%+: more than 85% trainees feedback that the training content "meets" or "fully meets" their own work needs; Case utility is recognized: most trainees highly evaluate the quality of the classroom cases, that the cases are close to the actual work scenarios, and that they can effectively improve the ability to solve practical problems.

Fourth, the annual training ended successfully, JiuJu hand in hand with the Association to promote the development of the industry

So far, Guangdong Magnetic Components Industry Association 2025 four technical training activities have been successfully concluded. As a backbone enterprise in the industry, JiuJu participated in the four annual training, witnessed the continuous optimization and upgrading of the course system, and its feedback on the practical needs and technical suggestions has also become an important reference for the Association's course iteration.

Looking ahead, the association will continue to be guided by the actual needs of enterprises, continue to optimize the course system, invite more experts from the field to create more high-quality thematic training. Here, the association eagerly calls on the members, including JiuJu, to maintain close communication with the secretariat, provide timely feedback on the real training needs, and join hands to jointly promote the technological innovation and talent pool of the magnetic components industry, and inject strong momentum for the sustainable and healthy development of the industry!

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

久巨充磁案例：硅膠磁材產品的充磁全流程記錄

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 在工業制造領域，硅膠磁性產品因兼具柔性特質與磁性能，廣泛應用于智能穿戴、密封組件等場景。其磁性能的精準賦予，核心依賴專業充磁工藝。本次久巨充磁承接硅膠產品充磁項目，成功實現產品磁力從0.01高斯到15.5高斯的跨越式提升，以下為全流程詳…

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

電機充磁機：工廠選型時最該關注哪些核心指標

2026年3月5日

電機充磁機：工廠選型時最該關注哪些核心指標

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。 一、充磁的本質：為電機賦予…

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

電機充磁機：工廠選型時最該關注哪些核心指標

2026年3月5日

電機充磁機：工廠選型時最該關注哪些核心指標

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。 一、充磁的本質：為電機賦予…

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

電機充磁機：工廠選型時最該關注哪些核心指標

2026年3月5日

電機充磁機：工廠選型時最該關注哪些核心指標

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。 一、充磁的本質：為電機賦予…

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

電機充磁機：工廠選型時最該關注哪些核心指標

2026年3月5日

電機充磁機：工廠選型時最該關注哪些核心指標

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。 一、充磁的本質：為電機賦予…

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

電機充磁機：工廠選型時最該關注哪些核心指標

2026年3月5日

電機充磁機：工廠選型時最該關注哪些核心指標

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。 一、充磁的本質：為電機賦予…

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

2026年2月25日

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...